SIEMENS 6ES7132-6GD51-0BA0 Digital I/O-Modul DC 19,2-28,8V 4Ausg
Preise werden nach den Login angezeigt
Technische Daten
| Anzahl der digitalen Eingänge: | 0 |
|---|---|
| Appendant operation agent (Ex ia): | Nein |
| Appendant operation agent (Ex ib): | Nein |
| Art der Ausgangsspannung: | AC/DC |
| Art der Eingangsspannung: | - |
| Ausführung des elektrischen Anschlusses: | -, Federzuganschluss |
| Ausgangsstrom: | - |
| Breite: | 15 |
| Certified for UL hazardous location class I: | - |
| Certified for UL hazardous location class II: | - |
| Certified for UL hazardous location class III: | - |
| Certified for UL hazardous location division 1: | - |
| Certified for UL hazardous location division 2: | - |
| Certified for UL hazardous location group A (acetylene): | - |
| Certified for UL hazardous location group B (hydrogen): | - |
| Certified for UL hazardous location group C (ethylene): | - |
| Certified for UL hazardous location group D (propane): | - |
| Certified for UL hazardous location group E (metal dusts): | - |
| Certified for UL hazardous location group F (carbonaceous dusts): | - |
| Certified for UL hazardous location group G (non-conductive dusts): | - |
| Digital inputs configurable: | - |
| Digital outputs configurable: | Ja |
| Explosion safety category for dust: | - |
| Explosion safety category for gas: | - |
| Fieldbus connection over separate bus coupler possible: | Ja |
| Front built-in possible: | Nein |
| Geeignet für Sicherheitsfunktionen: | Nein |
| Geeignet für Tragschienenmontage: | Ja |
| Höhe: | 73 |
| IO link master: | Nein |
| Input current at signal 1: | - |
| Mobile communication standard 2G (GSM): | Nein |
| Mobile communication standard 3G (UMTS): | Nein |
| Mobile communication standard GPRS: | Nein |
| Number of HW-interfaces RS-232: | 0 |
| Number of HW-interfaces RS-422: | 0 |
| Number of HW-interfaces RS-485: | 0 |
| Number of HW-interfaces USB: | 0 |
| Number of HW-interfaces industrial Ethernet: | 0 |
| Number of HW-interfaces other: | 0 |
| Number of HW-interfaces parallel: | 0 |
| Number of HW-interfaces serial TTY: | 0 |
| Number of HW-interfaces wireless: | 0 |
| Number of digital outputs: | 4 |
| Number of interfaces PROFINET: | 0 |
| Performance Level nach EN ISO 13849-1: | - |
| Permitted voltage at input: | - |
| Permitted voltage at output: | 19.2 |
| Rack-assembly possible: | Nein |
| Radio standard Bluetooth: | Nein |
| Radio standard WLAN 802.11: | Nein |
| SIL nach IEC 61508: | - |
| Schutzart (IP): | IP20 |
| Short-circuit protection, outputs available: | Nein |
| Spannungsart der Versorgungsspannung: | DC |
| Supporting protocol for EtherCAT: | - |
| System accessory: | Ja |
| Tiefe: | 58 |
| Time delay at signal change: | - |
| Type of digital output: | Relay |
| Unterstützt Protokoll für AS-Interface Safety at Work: | Nein |
| Unterstützt Protokoll für ASI: | Nein |
| Unterstützt Protokoll für CAN: | Nein |
| Unterstützt Protokoll für Data-Highway: | Nein |
| Unterstützt Protokoll für DeviceNet: | Nein |
| Unterstützt Protokoll für DeviceNet Safety: | Nein |
| Unterstützt Protokoll für EtherNet/IP: | - |
| Unterstützt Protokoll für Foundation Fieldbus: | Nein |
| Unterstützt Protokoll für INTERBUS: | Nein |
| Unterstützt Protokoll für INTERBUS-Safety: | Nein |
| Unterstützt Protokoll für KNX: | Nein |
| Unterstützt Protokoll für LON: | Nein |
| Unterstützt Protokoll für Modbus: | - |
| Unterstützt Protokoll für PROFIBUS: | Nein |
| Unterstützt Protokoll für PROFINET CBA: | Nein |
| Unterstützt Protokoll für PROFINET IO: | Nein |
| Unterstützt Protokoll für PROFIsafe: | Nein |
| Unterstützt Protokoll für SERCOS: | Nein |
| Unterstützt Protokoll für SUCONET: | Nein |
| Unterstützt Protokoll für SafetyBUS p: | Nein |
| Unterstützt Protokoll für TCP/IP: | Nein |
| Unterstützt Protokoll für sonstige Bussysteme: | Nein |
| Versorgungsspannung AC 50 Hz: | - |
| Versorgungsspannung AC 60 Hz: | - |
| Versorgungsspannung DC: | 19.2 |
| Wand-/Direktmontage möglich: | Nein |
| With optical interface: | Nein |
Beschreibung
Simatic Et 200sp, Signal-Relaismodul, Rq Co 24v Dc/2a St
Mit SIMATIC ET 200SP bietet Siemens Ihnen ein multifunktionales und dezentrales Peripheriesystem, das aufgrund seiner platzsparenden Bauweise ganz einfach in Betrieb genommen werden kann.
Technische Details:
- 4 Wechslerkontakte potenzialgetrennt
- Verpackungseinheit: 1 Stück
- Passend für BU-Typ A0
- Farbcode CC00
- Ersatzwertausgabe
- Modul-Diagnose für: Versorgungsspannung
- Schutzart: IP20
- Integration des MultiFeldbus Interfacemoduls IM155-6MF
Kunden Vorteile:
- Maximale Flexibilität durch Multi Hot Swapping der Module
- Einheitliches Kennzeichnungssystem für einfache Montage und Service
- Zukunftssicherheit durch innovative und langlebige Automatisierungsprodukte
- Durchgängige Datenverfügbarkeit und flexible Anwendungsfälle
- Optimale Performance durch vielseitige Integrationsmöglichkeiten
- Skalierbare und kostenoptimierte Konfiguration mit einem umfassenden Spektrum von Signalbaugruppen
- Geeignet für Motoren bis 5,5 kW mit integrierten Motorstartern
- Umfangreiches Zubehör für maximale Übersichtlichkeit im Schaltschrank
Haftungsausschluss: Generiert durch KI.